Caliburn Hardware Kits

$55.00$65.00

Contains all hardware needed to assemble a 3D printed Caliburn. Included but not pictured: pins & buttplate with foam.

Optional color variations for main tubes: large and short.

Assembly instructions:
Normal: http://captainslug.com/nerf/Caliburn3DPAssembly5.pdf

Warning: Some tubes are slightly smaller O.D. than others and will require the use of rings to keep them centered. Thinwall 1-1/4″ PVC is the perfect size or 3D print them. On a similar note, aluminum is slightly larger than polycabonate and rings have a very tight fit on them.

If you want additional springs, they can be purchased here: http://blogderrikksun.com/product/replacement-main-power-spring/

Clear
SKU: N/A Categories: ,

Description

Contains all hardware needed to assemble the most updated version of a 3D printed Caliburn.

Optional color variations for main tubes: large and short.

Assembly instructions:
Normal: http://captainslug.com/nerf/Caliburn3DPAssembly6.pdf

Note: Mega kit and Rival Kit hardware differ slightly and will be shipped with appropriate changes.

Includes:
Main power spring (K14,K26,K25,788,K31) 1
High-Pressure Nylon Tubing, Opaque, 0.242″ ID, 5/16″ OD 3×11.25″,6″
6061 Aluminum, 3/32″ Thick x 1/2″ Wide 2×14.5″
Choice of plunger tube (Clear, blue, black, green, orange, yellow, purple, red, metal, white) 7.375in
Low-Strength Zinc-Plated Steel Threaded Rod, 10-32 Thread Size 7.5″,2×14″,2×12.5″,2×12.25″
Steel Locknut with External-Tooth Lock Washer, 10-32 Thread Size 13
Oil-Resistant Buna-N O-Ring, 1/16 Fractional Width, Dash Number 012 1
Oil-Resistant Buna-N O-Ring, 3/32 Fractional Width, Dash Number 123 2
Architectural 6063 Aluminum Round Tube, 0.049″ Wall Thickness, 5/8″ OD 14″
Steel Extension Spring with Loop Ends, 1″ Long, 0.25″ OD, 0.023″ Wire 2
Low-Strength Steel Nylon-Insert Locknut, Zinc-Plated, 4-40 Thread Size 5
Zinc-Plated Steel Coupling Nut, Low-Strength, 10-32 Thread Size 1
Steel Rounded Head Screws, 10-32 Thread Size, 1/4″ Long – 50pk 4
Steel Phillips Flat Head Screws, 4-40 Thread Size, 3/8″ Long – 100pk 11
18-8 Stainless Steel Rounded Head Screw, 10-32 Thread Size 1
Spring-Back 302/304 Stainless Steel Wire, 0.063″ Dia 5x
Choice of stock tube (Clear, blue, black, green, orange, yellow, purple, red, metal, white) 3in
Adhesive Silicone Rubber Sheet with Adhesive-Back, 12″ x 12″, 1/8″ Thick 1
Buttplate with Foam Sheet 3/4″ Thk Adhesive-Back Polyethylene 1
Nylon 6/6 Plastic Cap Nut, 10-32 Thread Size 1
PEX 3/4″ 10.75″
Female Threaded Round Standoff, Aluminum, 1/4″ OD, 11/32″ Long, 4-40 1

Additional information

Weight 2.5 lbs
Dimensions 12 x 10 x 4 in
Plunger Tube Color

Clear (Polycarbonate), Red (PVC), Green (PVC), White (PVC), Blue (PVC), Purple (PVC), Yellow (PVC), Black (PVC), Orange (PVC), Metal (Aluminum)

Spring

K14 (madness), K26 (195 FPS avg), K25 (175 FPS avg), 788 (135 FPS avg), K31 (115 FPS avg)

Smaller (stock) tube color

Red (PVC), Green (PVC), White (PVC), Blue (PVC), Purple (PVC), Yellow (PVC), Black (PVC), Orange (PVC), Clear blue (PVC), Metal (Aluminum)

Kit Type

14" Barrel ($55), 18" Barrel ($58), Rival Kit (.844 ID) ($60), Mega Kit (.777 ID) ($65), Mega Plastic Barrel (.79 ID with barrel sheath) ($60)

Buttplate Foam Color

White, Grey

Reviews

There are no reviews yet.

Be the first to review “Caliburn Hardware Kits”

Your email address will not be published. Required fields are marked *